Skip to main content

Is it possible to use both MicroTrace connectors, A and B to debug two targets? - Knowledgebase / Setup / update - Lauterbach Support

Is it possible to use both MicroTrace connectors, A and B to debug two targets?

Only connector A of the MicroTrace can be used together with a whisker cable for debugging.
Debugging two targets using two whisker cables is only possible with the CombiProbe. The standard configuration of the MicroTrace is with a MIPI20T whisker cable plugged to connector A. The extended configuration is to add a TRACE32 Analog Probe plugged to connector B via a Converter MicroTrace to PI-Analog Probe. The TRACE32 Analog Probe enables an energy profiling of your application.  

Helpful Unhelpful