Skip to main content

[Arm] SYStem.DETECT sets the CPU to "NONE" - Knowledgebase / FAQs by core architecture / Arm - Lauterbach Support

[Arm] SYStem.DETECT sets the CPU to "NONE"

The SYStem.DETECT command is not intended to detect the used CPU on Arm, but to detect the DAP in the JTAG chain. Please check if your chip is listed under SYStem.CPU . If not, please contact the Lauterbach support (support@lauterbach.com) and specify your TRACE32 software version. You may also check if the chip is officially supported by Lauterbach using the "Chip" search field on the Lauterbach website.

Helpful Unhelpful