Skip to main content

[MPC5xxx] Impacts of the Nexus probe during energy measurement - Knowledgebase / FAQs by core architecture / MPC5xxx / SPC5xx - Lauterbach Support

[MPC5xxx] Impacts of the Nexus probe during energy measurement

Some recommendation for Energy measurements using the Nexus probe:

In case of Nexus AutoFocus probe LA-7630, it is recommended to turn the active termination off.

There is not much difference between disable Nexus trace probe hardware (Analyzer.disable) and turn off the Nexus cell (NEXUS.OFF).

Helpful Unhelpful